 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.fairchildsemi.com www..com KA3S0765R/KA3S0765RF Fairchild Power Switch(SPS) Features * * * * * * * * * Wide operatimg frequency range up to (150kHz) Pulse by pulse over current limiting Over load protection Over voltage protecton (Min. 23V) Internal thermal shutdown function Under voltage lockout Internal high voltage sense FET External sync terminal Auto Restart Mode Description The SPS product family is specially designed for an offline SMPS with minimal external components. The SPS consist of high voltage power SenseFET and current mode PWM IC. Included control IC features a trimmed oscillator, under voltage lock-out, leading edge blanking, optimized gate turnon/turn-off driver, thermal shut down protection, over voltage protection, temperature compensated precision current sources for loop compensation and fault protection circuit. Compared to discrete MOSFET and controller or RCC switching converter solution, a SPS can reduce total component count, design size, weight and at the same time increase & efficiency, productivity, and system reliabilit. It has a basic platform well suited for cost-effective C-TV power supply. TO-3P-5L TO-3PF-5L 1 1 1. DRAIN 2. GND 3. Vcc 4. FB 5. Sync Internal Block Diagram #3 VCC 32V 5V Vref - 5V + 6.4V #4 FB 2A 1mA 2.5R 1R 9V + 7.5V - + 25V - Thermal S/D OVER VOLTAGE S/D - + 0.1V S R Q #2 GND OSC S R L.E.B Q Good logic Internal bias #1 DRAIN SFET #5 Sync Power on reset Rev.1.0.1 (c)2001 Fairchild Semiconductor Corporation KA3S0765R/KA3S0765RF Absolute Maximum Ratings www..com Characteristic Maximum drain voltage (1) Symbol VD,MAX VDGR VGS IDM IAS ID ID VCC,MAX VFB PD (watt H/S) Value 650 650 30 28.0 20 7.0 5.6 30 -0.3 to VSD 140 1.11 -25 to +85 -55 to +150 Unit V V V ADC A ADC ADC V V W W/C C C Drain-gate voltage (RGS=1M) Gate-source (GND) Voltage Drain current pulsed Avalanche current Continuous drain current (TC=25C) Continuous drain current (TC=100C) Maximum supply voltage Input voltage range Total power dissipation Operating ambient temperature Storage temperature (2) Derating TA TSTG Notes: 1. Tj=25C to 150C 2. Repetitive rating: Pulse width limited by maximum junction temperature 3. L=24mH, VDD=50V, RG=25, starting Tj=25 C 2 KA3S0765R/KA3S0765RF Electrical Characteristics (SFET part) www..com otherwise specified) (Ta = 25C unless Characteristic Drain-source breakdown voltage Symbol BVDSS Test condition VGS=0V, ID=50A VDS=Max., Rating, VGS=0V VDS=0.8Max., Rating, VGS=0V, TC=125C VGS=10V, ID=4.0A VDS=15V, ID=4.0A VGS=0V, VDS=25V, f=1MHz VDD=0.5BVDSS, ID=7.0A (MOSFET switching time are essentially independent of operating temperature) VGS=10V, ID=7.0A, VDS=0.5BVDSS (MOSFET switching time are essentially independent of operating temperature) Min. 650 3.0 - Typ. 1.25 1600 310 120 25 55 80 50 9.3 29.3 Max. 50 200 1.6 72 - Unit V A mA W S pF Zero gate voltage drain current IDSS Static drain-source on resistance (note) Forward transconductance (note) Input capacitance Output capacitance Reverse transfer capacitance Turn on delay time Rise time Turn off delay time Fall time Total gate charge (gate-source+gate-drain) Gate-source charge Gate-drain (Miller) charge RDS(ON) gfs Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd nS nC Note: Pulse test: Pulse width < 300S, duty cycle < 2% 1 S = --R 3 KA3S0765R/KA3S0765RF Electrical Charcteristics (CONTROL part) www..com otherwise specified) (Ta = 25C unless Characteristic UVLO SECTION Start threshold voltage Stop threshold voltage OSCILLATOR SECTION Initial accuracy Frequency change with temperature (2) Maximum duty cycle FEEDBACK SECTION Feedback source current Shutdown Feedback voltage Shutdown delay current SYNC. & SOFT START SECTION Soft start voltage Soft start current Sync threshold voltage(3) REFERENCE SECTION Symbol VSTART VSTOP FOSC F/T Dmax IFB VSD Idelay VSS ISS VSYTH Test condition After turn on Ta=25C -25CTa+85C Ta=25C, Vfb=GND Ta=25C, 5VVfbVSD VFB=2V Sync & S/S=GND Vfb=5V Min. 14 9 18 92 0.7 6.9 1.4 4.7 0.8 6.0 4.80 4.40 140 23 0.1 6 30 Typ. 15 10 20 5 95 0.9 7.5 1.8 5.0 1.0 6.4 5.00 0.3 5.00 160 25 0.3 12 32.5 Max. 16 11 22 10 98 1.1 8.1 2.2 5.3 1.2 6.8 5.20 0.6 5.60 28 0.55 18 35 Unit V V kHz % % mA V A V mA V V mV/C A C V mA mA V Output voltage (1) Vref Ta=25C Vref/T Temperature Stability (1)(2) -25CTa+85C CURRENT LIMIT (SELF-PROTECTION) SECTION Max. inductor current Peak Current Limit IOVER PROTECTION SECTION Thermal shutdown temperature (Tj) (1) Over voltage protection voltage TOTAL DEVICE SECTION Start Up current Operating supply current (control part only) VCC zener voltage ISTART IOP VZ VCC=14V Ta=25C ICC=20mA TSD VOVP - NOTE: 1. These parameters, although guaranteed, are not 100% tested in production 2. These parameters, although guaranteed, are tested in EDS(water test) process 3.The amplitude of the sync. pulse is recommended to be between 2V and 3V for stable sync. function. 4 KA3S0765R/KA3S0765RF Typical Performance Characteristics www..com graphs are normalized at Ta = 25C) (These characteristic Fig.1 Operating Frequency 1.2 1.15 1.1 1.05 Fosc 1 0.95 0.9 0.85 0.8 -25 0 25 50 75 100 125 150 1.2 1.15 1.1 1.05 Ifb IFB 1 0.95 0.9 0.85 0.8 -25 Fig.2 Feedback Source Current 0 25 50 75 100 125 150 Temperature [C] Temperature [C] Figure 1. Operating Frequency Figure 2. Feedback Source Current Fig.3 Operating Current 1.2 1.15 1.1 1.05 Iop 1 0.95 0.9 0.85 0.8 -25 1.1 1.05 Fig.4 Max Inductor Current IIpeak 1 over 0.95 0.9 0.85 0 25 50 75 100 125 150 0.8 -25 0 25 50 75 100 125 150 Temperature [C] Temperature [C] Figure 3. Operating Supply Current Figure 4. Peak Current Limit 1.5 1.3 Fig.5 Start up Current 1.15 1.1 1.05 Fig.6 Start Threshold Voltage IST Istart 1.1 0.9 0.7 0.5 -25 Vth(H) 1 Vstart 0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150 Temperature [C] Temperature [C] Figure 5. Start up Current Figure 6. Start Threshold Voltage 5 KA3S0765R/KA3S0765RF Typical Performance Characteristics (Continued) www..com graphs are normalized at Ta = 25C) (These characteristic Fig.7 Stop Threshold Voltage 1.15 1.1 1.05 1.15 1.1 1.05 Fig.8 Maximum Duty Cycle Vth(L) Vstop 1 0.95 0.9 0.85 -25 0 25 50 75 100 125 150 Dmax 1 0.95 0.9 0.85 -25 0 25 50 75 100 125 150 Temperature [C] Temperature [C] Figure 7. Stop Threshold Voltage Figure 8. Maximum Duty Cycle Fig.9 Vcc Zener Voltage 1.2 1.15 1.1 1.05 Vz 1 0.95 0.9 0.85 0.8 -25 1.15 1.1 1.05 Fig.10 Shutdown Feedback Voltage Vsd 1 0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150 Temperature [C] Temperature [C] Figure 9. VCC Zener Voltage Figure 10. Shutdown Feedback Voltage Fig.11 Shutdown Delay Current 1.2 1.15 1.1 1.05 Idelay 1 0.95 0.9 0.85 0.8 -25 1.15 1.1 1.05 Fig.12 Over Voltage Protection Vovp 1 0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150 Temperature [C] Temperature [C] Figure 11. Shutdown Delay Current Figure 12. Over Voltage Protection 6 KA3S0765R/KA3S0765RF Typical Performance Characteristics (Continued) www..com graphs are normalized at Ta = 25C) (These characteristic Fig.13 Soft Start Voltage 1.15 1.1 1.05 2.5 2 1.5 ( Rdson)1 Fig.14 Drain Source Turn-on Resistance Vss 1 0.9 0.95 0.85 -25 0.5 0 25 50 75 100 125 150 0 -25 0 25 50 75 100 125 150 Figure13. Soft Start Voltage Figure 14. Static Drain-Source on Resistance 7 KA3S0765R/KA3S0765RF Package Dimensions www..com TO-3P-5L 8 KA3S0765R/KA3S0765RF Package Dimensions (Continued) www..com TO-3P-5L (Forming) 9 KA3S0765R/KA3S0765RF Package Dimensions (Continued) www..com TO-3PF-5L 10 KA3S0765R/KA3S0765RF Package Dimensions (Continued) www..com TO-3PF-5L(Forming) 11 KA3S0765R/KA3S0765RF Ordering Information www..com Product Number Package TO-3P-5L TO-3P-5L(Forming) TO-3PF-5L TO-3PF-5L(Forming) Rating 650V, 7A 650V, 7A Operating Temperature -25C to +85C -25C to +85C KA3S0765R-TU KA3S0765R-YDTU KA3S0765RF-TU KA3S0765RF-YDTU TU : Non Forming Type YDTU : Forming Type 12 KA3S0765R/KA3S0765RF www..com 13 KA3S0765R/KA3S0765RF www..com DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2/5/01 0.0m 001 Stock#DSxxxxxxxx 2001 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. |
Price & Availability of 3S0765R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |